數控六面鉆 KD-612G | 側銑主軸可360°旋轉，實現高定工藝加工
2024-02-22 來自: 蘭州九力機電設備有限責任公司 瀏覽次數:463
數控六面鉆 KD-612G | 側銑主軸可360°旋轉，實現高定工藝加工
HIGHLIGHTS
Spindle For Side Routering
鉆包左側帶C軸9kW側銑主軸，可360度旋轉，實現板件的四面銑型。
9kw spindle with C axis equiped on left side of the drill set, available for 360° turning to realize side routering.
上鉆包增加鉆桿數量，可實現三合一孔、臺階鉆的加工。
Increase the quantity of horizantal drill shafts in upper drill set,available to make 3 in 1 drill and step drills.
Layout of the Operation Unit
14V+10H上鉆包,9V下鉆包
Upper drill set:14V+10H,lower drill set:9V.
Dual Bottom Spindles
免頻繁換刀，提高其效率。
Reduce the times in tools changing,thus to improve efficency.
2-layers ATC With Total 10-fold
換刀速度快、自動對刀，滿足多種隱形連接件復雜銑型、切邊的工藝需求。
Quick tools change, auto tools pre-setter,satisfying demands in process various invisible fittings, routering and side cutting.
2-post ATC On Left Side
標配一字側銑直角頭，選配45°、十字或帶鋸片側銑直角頭。
Aggregate with 2-way outlets come as standard, options for 45° degree ，4-way oulets or side aggregate.
Upgraded Software
前瞻式打孔：通過智能AI蟻群算法，規劃路徑，鉆桿實現提前輸出，效率提升15%。
Proactive drilling: Plan the optimal path according to AI ant Algorithm, drill shaft pre-ejects out, increasing efficient work by 15% .
Diversified Process Libraries
靈活調用，簡單編輯，程序自動生成加工路徑。
Flexible calls for the required machining ,simple editing and automatic generation of machining path
CONFIGURATIONS
Air-floatation worktable
多段行程的雙平移氣浮臺，避讓更智能、支撐更合理。
Air-floatation worktable structured with multi-sectional travels intelligently prevents collision and leads to stronger support.
Clamp with auto-cleaning system
5.5米抓手導軌，抓手移動速度140m/min。
5500mm clamp stroke equipped, max.moving speed is up to140m/min.
有效吹凈板面灰塵，貼合更充分抓取更牢固，鉆孔更準。
Effectively blow off the dust,leading to a tight gripping and accurate drilling.
3 Bearing rods
小板定位準，換手不傷板。
Ensure accurate positions with small boards and no damage on workpiece edge in clamp changeover.
Pressure plate
壓板覆蓋面積廣，加工振動小、精度高保護板材不被劃傷。
Large pressure area, less vibration, high accuracy,and less risks on panel scratches.
DIVERSIFIED PROCESS LIBRARIES
