KE-493G(45) | 智能端頭封邊機，四刀高速跟蹤快又準！

獨立控制送帶機構

將突出于木板上下表面多余邊帶切除，使封邊帶上下邊緣與木板的上下表面平齊。

Trim excess edge off the panel top and bottom, to have a level and smooth edging results.

配備4組高頻電機，圓角仿形修邊快速準，可實現多種倒角修邊工藝。

Equips with 4 trimming motors, fast and stable in corner profiling.

去除封邊帶與板材之間的多余膠線，除塵效果好，提高封邊質量。

Removes residual glue line for a better edging results.

壓梁自動定位

送板操作方便平穩，有效防止板材端頭封邊偏位，確保封邊質量。

Stable feeding with small pieces, effectively prevent workpiece out of guide, and ensure for a best edging results.

標配40mm銑刀（選配65mm），采用雙銑刀對開料產生的波紋痕跡、毛刺或不垂直等現象進行修飾，使封邊條與板材的貼合更加緊密，整體性和美觀度更佳。

Standard with 40T pre-milling cutter, to trim off the defects of panel surface, and thus to achieve a close sticking and a better edge results.

通過精密的直線導軌運動，快速切斷板材前后多余邊帶,確保切斷面平整光滑。

Motions along the precision linear guides, quickly cut off the excess edge at front and rear of the panel to ensure a smooth cut surface.

高硬度、高耐磨性。

High-hardness, high wear-resistance.

消除修邊非直線運動切削過程引起的波紋痕跡，使板材上下部分更加光滑整潔。

Trim off the tools marks, ensuring the best edging quality.

清除板件上下面的余膠和碎屑。

Clean excess glue and chips off the panel top and bottom.